Avaya Aura Скачать руководство пользователя страница 44

Страница: 44 / 162

You can select one the following profiles from the

Configuration

drop-down menu:

• AAWG 3.0 Profile 3 Max Sessions 5,000

• AAWG 3.0 Profile 1 Max Sessions 1,250

• AAWG 3.0 Profile 2 Max Sessions 2,500

8. From the Host/Cluster page, do the following:

a. Select the host on which the template will be deployed.

b. Click

Next

9. From the Disk Format page, do the following:

a. Select a thick or thin provision option.

If you select a thick provision option, the entire disk space will be reserved and
unavailable for other virtual machines to use.

If you select the thin provision option, unused space will be available for other virtual
machines to use.

b. Click

Next

10. From the Network Mapping page, do the following:

a. Map the source network used with the appropriate destination network.

b. Click

Next

11. From the Properties page, do the following:

a. Complete the required network information, such as your IP address, host name or

FQDN, Netmask, and DNS.

b. Enter credentials for a Linux administrator user, which include the user name,

password, and group.

The default user name is

admin

, group is

admingrp

, and password is

avaya123

12. From the Ready to Complete tab, verify your settings and then click

Next

to complete the

installation.

Next steps

Install the Avaya Aura

Web Gateway.

Deploying the Avaya Aura

Web Gateway OVA using vSphere

Procedure

1. Log in to vSphere.

2. Navigate to

File

Deploy OVF Template

3. Perform steps

on page 43 to

on page 44.

These steps are the same in vCenter and vSphere.

Initial setup for VMware and AWS deployments

October 2018

Deploying the Avaya Aura

Web Gateway

Comments on this document? [email protected]

Содержание Aura



































































































































































Результаты поиска

Содержание Aura

Отзывы:

Avaya Aura, Руководство по развертыванию, Страница: 44 / 162

Результаты поиска

Содержание Aura

Отзывы: