Avaya AP100 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 10

Avaya AP100 Скачать руководство пользователя страница 8

Meru Networks WLAN Controllers with AP100, AP201, AP208

Configuration Guide

Field Verified

Page 8

ESSID configuration

The ESSID used by wireless IP telephones in production is of a similar configuration but
would be configured for Virtual Cell and be assigned with the appropriate security profile.

It is important to note that when enabling the multicast support (for the server discovery and
PTT feature) you must ensure that there is only one ESSID per VLAN otherwise multicast
traffic is not passed.

If the deployment utilizes Avaya Call Servers on a software version older than 0.100 and does
not have a Avaya Voice Priority Processor, then all 802.11 base rates higher than 1.2 Mbps
must be disabled for the wireless IP telephone ESSID. If your deployment utilizes a Avaya
Voice Priority Processor or is running version 0.100 or higher on the Avaya Call Server then
1,2,5.5, or 11 Mbps may be utilized as base and supported rates.

essid svp

security-profile

chosen_security_profile

vlan svp_vlan

(if required)

multicast-enable

ap-discovery join-ess

no ap-discovery join-virtual-ap

beacon dtim-period 2

beacon period 100

no publish-essid

exit

«
...
6
7
8
9
10
»

Содержание AP100











Отзывы:

Нет отзывов