Avaya 9101 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 16

Avaya 9101 Скачать руководство пользователя страница 14

6

Call-Handling

Placing and Answering a Call

To place a call

1

Lift the handset.

2

Dial the desired number.

Note: If your telephone line is set to the Pulse position for normal
dialing, but you need to enter touch-tones for telephone answering/
messaging systems or such services as electronic banking-by-phone,
press

during the dialing sequence. This will change the

subsequent numbers from pulse to tones. Your telephone will revert to
Pulse when you have finished the call.

To answer a call

1

Lift the handset.

2

Speak to the other party.

Hold

To put a call on hold

1

While on a call, press the FLASH button.

To return to the held call

1

Press the FLASH button twice.

•

You are connected to the held call.

Conference

To add a third party to a call

1

While on a call, press the FLASH button.

•

The present call is put on hold.

2

Dial the number of the third party.

Note: You can privately discuss the call with the third party
at this time; if there is no answer or busy, press the FLASH
button twice to return to the original party.

«
...
12
13
14
15
16
»

Содержание 9101

















Отзывы:

Нет отзывов