Avaya 7406E, Руководство по установке и настройке

Страница: 44 / 60

44 Chapter 4 Registering, deregistering, and resetting the Avaya 7406E Digital Mobile Handset
NN40110-301 NN40110-301
Registering a handset
You must assign the port ID to the handset before you can register the handset. If you do not assign
a port ID to the handset first, the
Please Register!
message appears on the LCD. Make sure
the base station is in idle mode and the handsets are in idle mode before you start this procedure.
You must pair the handsets with a base station by registering the handsets. When you register a
handset, you establish a link between that handset and the base station. Registering a handset
prevents illegal use of or interception of conversations on the handset. Each time you register a
handset with the base station, the system generates a random secret code and sends it to that
handset.
Refer to Appendix A, “DIP switch settings ” for the correct DIP switch settings.
1 Remove the power cord from the back of the base station.
2 Set the DIP switches at the back of the base station to registration mode.
If you do nothing with the handset for more than 30 seconds when the system is in registration
mode, the system returns automatically to normal operation mode without you having to
change the DIP switches.
3 Log on to the Maintenance menu.
4 Use the up and down softkeys to navigate to the Registration option.
5 Press Select .
6
Use the up and down softkeys to navigate to the Ye s option.
7 Press Select to register the phone.
The
Please Wait!
message appears on the LCD.
8 Plug the power source back into the base station.
The base station power LED blinks rapidly.
9 After 5 seconds, the base station enters registration mode.
10
Place the handset near the base station.
If you successfully registered the handset the
Registered!
message appears in the LCD. If
you did not register the handset successfully, the
Failed! Try Again!
message appears.
Repeat steps 1 through 10.
You return to the top of the Maintenance menu.
11 Remove the power source from the base station.
Caution: Risk of service disruption
Always make sure that there are no TCM lines connected between the KSU and
the base station when the base station is in registration mode, or when you are
registering a handset.