Avaya 3740, Руководство пользователя

Страница: 55 / 151

Calling
Avaya 374x DECT Telephones - User Guide 02/2016
55
Ending a call
A press on ends the call. The duration of the call is shown in the display. The total time of the
call can also be retrieved from the Calls menu > Call time.
A call can also be ended by putting the handset in a charger. Note that all ongoing calls are
disconnected. See In Charger Action when not in Call on page 106.
Note:
Note:
You can also to end a call by putting the handset in a charger. All ongoing calls
will be disconnected if you use this method to end a call.
Outgoing call
Dialing a number (Pre-Dial)
Enter the number and press to get the line. The number is shown on the display while
dialing. If needed, press "Clear" to erase the number. By using the navigation key it is possible
to step and add or delete a digit in a number.
The tone sender in a pre-dialed number can be turned on by long pressing .
An international number can be dialed from the handset by entering a + character followed by
the country code and local number. To enter the + character, long press the 0 key until the
character is shown in the display.
NOTE: The + character cannot be entered and international numbers cannot de dialled in the following
circumstances:
●
If the 0 key has been configured as a hot key.
●
If the handset has been set up to perform advanced functions normally used by a system
administrator, as described in
Admin menu on page 109.
Dialing a number directly (Post-Dial)
1. Press to get the line and enter the number.
Note: The number is not added to the call list when pre-dial is used.
Dialing a number from the call list
Tip:
Tip:
A number can be dialed from the Call list by pressing , selecting a number from
the list and pressing "Call" or .