manualshive.com logo in svg

Avaya 1120E, Руководство пользователя, Страница: 161 / 214

Поделиться
Скачать
Avaya 1120E Скачать руководство пользователя страница 161

Additional phone features

161

Note: 

Some IP Deskphones are configured as Virtual Office-only 

telephones and have no assigned DN. However, these IP 
Deskphones can still be used to make emergency calls. “Emergency 
Calls only “ is displayed on the IP Deskphone display when not 
logged in to Virtual Office. When the phone goes off-hook, dial tone is 
available for emergency calls only. All other calls are restricted. 

Troubleshooting Virtual Office

Virtual Office can display error messages on-screen. Table 10 lists error 
messages and describes actions to correct the causes.

Table 10: Troubleshooting Virtual Office (Part 1 of 3)

Displayed Message

Probable Cause

Actions

Busy, try again

Remote IP 
Deskphone is active 
(not idle).

Wait for remote IP 
Deskphone to 
become idle and try 
again.

ACD is logged in.

Log out ACD IP 
Deskphone before 
Virtual Office from 
another IP 
Deskphone.

Make Set Busy is 
inactive on ACD IP 
Deskphone. 

Configure Make Set 
Busy active on ACD 
IP Deskphone.

Invalid ID (1)

Incorrect User ID 
entered.

Enter correct User ID.

User ID is not in 
Gatekeeper 
database.

Notify system 
administrator.

Invalid ID (2)

Incorrect User ID 
entered.

Enter correct User ID.

Содержание 1120E























































































































































































































Отзывы:

Нет отзывов