Avanzini DRAGO P1, Инструкция по эксплуатации и обслуживанию

Страница: 72 / 96

CHAPTER 6
Instructions, use and maintenance manual
Page 72
D r a g o P 1
6.2.1. FIRST IgNITION WITH THE CONTROLS OF THE CONTROL PANEL
IMPORTANT!
Open the oven loading door prior to switching on the burner.
FIRST IgNITION
For the first ignition procedure, follow the operations described below:
STEP ACTION PICTURE
1
Rotate the control knob and keep it pressed on the
ignition position “
1 ”, while pressing the button “ A ” until
the pilot flame ignites.
3
2
1
A
2
Release the button “
A
”, while continuing to press the
control knob for another 30” after the pilot flame ignites.
3
Release the control knob and the burner must remain
on only with the pilot flame.
4
Move the control knob from the ignition position “ 1 ” to
the large flame position “ 2 ”.
5
Keep the control knob on the large flame position “ 2 ”
until the desired temperature is reached.
6
Check the temperature by moving the control knob, if
necessary, from the large flame position “ 2 ” to the small
flame position “ 3 ”.
CAUTION!
The first ignition may be difficult as it takes some time to let out all the air in the copper
pipe that feeds the pilot.
You must persist until all three flames have been lit on the pilot head for the main burner
to ignite properly.