3. Setting up your Bluetooth home music receiver
A
)
The red LED will go on automatically when the device is plugged into a standard AC socket
B
)
Plug the 3.5 mm audio cable end into Roxa’s 3.5 mm audio socket, and plug other end ( or 2 x RCA ) into the audio input on of
your home stereo system. Roxa’s blue LED will go on. 10 seconds later it will enter into pairing mode – the red and blue LEDs will
blink quickly. Pairing mode will last 2 minutes.
C
)
Paired with Bluetooth phone / tablet / PC or other Bluetooth transmitter
D
)
After successfully pairing and connect, you can enjoy music from your home stereo speaker, and control play-list via your phone
within 10 meter range.
4. Pairing with a Bluetooth device ( Tutorial online)
A ) Enter into pairing mode
Function
Operation
LED indicator
Power on
Plug Roxa into standard AC socket
Red Led stays on.
Turn on Bluetooth
Plug 3.5 mm audio cable end into Roxa’s
3.5 mm audio jack of Roxa
Red Led off, and Blue Led blinks every
1 seconds. ( lasting for 10 seconds)
Enter pairing mode
Roxa
will
enter
pairing
mode
automatically when turn on
Blue & red Led light blinks alternately
and quickly ( lasting for 2 minutes)
Turn off Bluetooth
Pull the 3.5mm audio cable from Roxa’s
3.5 mm audio jack
Blue LED off, Red Led stays on.
Notes:
The pairing mode will last 2 minutes, Roxa will into standby mode automacically, if no devices can be connected and paired within 2
minutes.(Based on if the 3.5 mm cable is still plugged into the Roxa’s 3.5 mm jack port of Roxa).
B
)
Pairing with Bluetooth phone / tablets :
Pls. make sure your phone has Bluetooth function and it is available. The pairing procedures are different for different devices. Please
refer to your cell phone / tablets / laptop / desktop user manual for further instructions.