When battery power is low, the red indicator light will flash red every 15 seconds.
4. Turn On / Off
Turn On
: From OFF, press and hold the “MFB” around 4 seconds until the indicator LED show Blue.
Turn Off
: From On, press and hold the “MFB” around 4 seconds until the indicator LED show red.
5. Working with mobile phone (Tutorial online)
It is important to pair the headset with your Bluetooth Mobile phone for the first time use.
5.1 Pairing procedure:
A.
Ensure the headset is off.
B.
Press and hold the MFB button (about 7-10 seconds) until LED blinks
blue
and
red
alternately.
C.
Search the headset from your phone.
D.
Once “Avantree Jogger’’ found in search list, follow the steps and enter pin code 0000 to pair
(some phones do not request the pin code);
E.
Connect the headset to your phone.
F.
Headset is ready for use now.
Once paired and connected, the headset will be automatically connected to your phone whenever
you turn the headset on again, provided your phone is in the range.
We found most of the online technical support questions are caused by improper pairing between the
headset and the Bluetooth device. Please follow the instruction step-by-step.
5.2 Basic Operations:
● Answering a call
:
Answering the first call:
Press the “MFB” button once to answer the first call.
Answering the second call:
Press the “MFB” button once to answer the second call and end the
first call simultaneously.
● Ending a call
: Press the “MFB” button once to end a call.
● Reject a call
:
Reject the first call:
Press and hold the “MFB” button for 3 seconds to reject the first call.
Reject the second call:
Press “Previous” button once to reject the second call.
● Voice Dial:
If your mobile phone has voice dialing enabled, when in standby mode short press
both ”V+” and “V-” then say the voice tag you wish to call. (Note: Some phones need to record the
voice tag in advance, and some no need.)
● Last number redialing
: In standby mode, double click the “MFB” button
● Switching a call between headset and mobile phone
:
Headset to Mobile Phone
: During a call, press and hold “MFB” for 2 seconds to transfer the call to
your mobile phone.
Mobile Phone to Headset
: During a call, press and hold “MFB” for 2 seconds to transfer the call to
your headset.
● Mute&Unmute
:
During a conversation -
Mute the microphone:
press and hold “Next” button till you hear a short beep. In mute status, you
will hear two beeps every 3 seconds.
Unmute the speakerphone:
press and hold “Next” button again till you hear a short beep
● Restore the Default Setting
: Under standby mode, press and hold ”Next” button for 8 seconds
until the indicator flash blue and red, then press and hold “MFB” button for 4 seconds, then you will
hear a beep, the headphone is now back to original setting, and after power on again, it will enter
pairing mode automatically.
