H.
After successful connection, the LED light will flash blue twice
every 4 seconds.
Note:
1.
The pairing mode will last 2 minutes. The receiver will enter standby
mode if no devices can be connected with 2 minutes.
2.
The receiver BTTC-200X can pair with stereo Bluetooth devices with PIN
code “0000”, “1111”, “8888” or “1234”.
3.
Once power on, the receiver BTTC-200X will be automatically connected
with the last connected device.
4.
The receiver BTTC-200X will automatically power off if no devices can be
connected within 5 minuters.
5.
Clear the pairing list: From off, press and hold the MFB button for about
12 seconds until red LED is on for 1 second and then blue LED is on for
1 second.
LED indicator
TC200 of TC200 under RX mode
Blue and Red LED blinks continuously
and alternatively
Pairing mode, lasts for 2 minutes
Blue LED flashes every 1 second
Standby mode, not connected with
device
Blue Led flashes twice every 4
seconds
Connected with a device
Red LED blinks
Low
Power
7.2 Stream the music
After the receiver BTTC-200X is connected to the Bluetooth device, you can
connect it to a 3.5mm stereo headset or stereo speaker with a 3.5mm to 3.5mm
audio cable. Now you can listen to music and control pause / play of music by
short pressing the MFB button once.
8. Product Specification
z
Bluetooth
V2.1+EDR
z
Bluetooth profile supported: A2DP and AVRCP
z
Operation Range: Class 2, 10 meters
z
TX mode working time: 10 hours
z
RX mode working time: 9 hours
z
Standby time: up to 400 hours
z
Charging time: about 2 hours
z
Charging input voltage: DC 5V
z
Battery: 270mAH rechargeable LI-polymer battery
z
Weight: 48.5g
z
Size: 50mm(L)x37mm(W)X13mm(H)
The working and standby times may vary when used with different mobile phones
or other compatible Bluetooth devices, usage settings, usage styles and
environments.
9. Safety Information
z
To avoid any damage or malfunction of the device do not drop device from
high places.
z
Keep device away form humidity, water and any other liquid. If the device is
exposed to water, moisture and other liquid, do not operate it to avoid any
electrical shock, explosion and damage to the device or yourself.
z
Do not place or keep this device near any heat source, such as, direct sun
light, radiators, stoves or other apparatus which produces heat. It may cause
explosion, degrade the performance and/or reduce battery life.
z
Do not modify, repair or disassemble device at discretion (Especially battery: It
may cause an explosion). Doing this will avoid the warranty.
z
Do not place heavy objects on the device.
z
Use only supplied and approved charger.
z
Replacement or service must be done by qualified service center or
manufacturer.
z
Unplug this device when unused for long periods of time or during lightning
storms.
CAUTIONS: ELECTRIC SHOCK HAZARD
The battery used in this device may present a risk of fire or chemical burn if
mistreated.
