Restore to default settings
You may find it necessary to reset the 10BS if it is not working as expected. After it is reset to factory
default settings, all the paired mobile phone information will be erased.
1. Set 10BS to PAIRING MODE - From off status, press and hold the MFB button for 7 seconds until LED
indicator flashes
BLUE
and
RED
alternately.
2. Double click the MFB button - you will see LED flashes
BLUE
and
RED
together very quickly about 2
times and then 10BS will turn off automatically.
Note:
For successful connection, please also delete the paired information from your phone and re-pair
with 10BS.
How to charge
When the LED flashes
RED
every 6 seconds, you should fully recharge the device for about 3 hours. The
LED will remain RED while charging and then turn off when charging is complete.
You can plug the 10BS into a USB wall charger/car charger (DC 5V / 0.5-1A) or computer USB port that is
powered on.
5
Hold for 7S
flashes
BLUE
and
RED
Double Click
Auto Power On
Auto Power On
DC 5V / 0.5-2A
OR
