about 2 times and then the headset will turn off automatically. Now your Audition Pro has been restored
to its default settings. After powered on again, it will enter pairing mode directly.
5. LED indications:
Working mode
Headphones LED indicator
SBC codec
LED flashes BLUE once every 7 seconds
AAC codec
LED flashes BLUE twice quickly every 7 seconds
aptX codec
LED flashes GREEN once every 7 seconds
aptX Low Latency codec
LED flashes GREEN twice every 7 seconds
Note: aptX Low Latency is supported when the headphones are paired with a transmitter that also
supports aptX Low Latency. This can be verified by the LED indications.
6. How to charge?
When the LED blinks red, you should recharge your headphones. Remove the Micro USB port protector
and charge the headphones via the supplied Micro USB cable. It normally takes about 3 hours to fully
charge the battery. The LED will stay red when charging and will turn off when charging is complete.
Charging requirement:
You can plug our supplied Micro USB cable to your own USB chargers (wall
charger/travel charger/car charger, etc) with 5V/500mA-2A or to a PC / Mac USB port. It is OK to use
most mobile phone chargers on the market.
7. Product specifications
Bluetooth version: 4.0
Supported profiles: HFP (Headset), HFP (Hands-Free), A2DP, AVRCP
Supported audio codecs: SBC, AAC, aptX, aptX Low Latency
Operational range: Class 2, 10 meters (33 feet)
Driver Diameter: 40mm
