11
CARE AND MAINTENANCE
* Defrosting
You will never have to defrost your refrigerator as it is designed to do it automatically. The defrosted
water drains into the evaporator tray located in the backside. You should clean the tray at regular
intervals. To get to the evaporator tray, remove the screws holding the plastic back cover located in the
rear (bottom).
* Cleaning Your Refrigerator
• Turn the temperature control to “MIN”, unplug the refrigerator, and remove the food, shelves, and trays.
• Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
• Wash the shelves and trays with a mild detergent solution.
• The outside of the refrigerator should be cleaned with mild detergent and warm water.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical
parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a
clean soft cloth.
• The condenser coils should be vacuumed when they are dusty or dirty.
* CHANGING THE LIGHT BULB
Before removing the light bulb, either unplug the refrigerator or disconnect the electricity leading into the
refrigerator at the main power supply. Failure to do so could result in electrical shock or personal injury.
• Remove the light bulb cover by pushing up the bottom end of the plastic cover gently.
• Unscrew the bulb.
• Replace with a 15 watt-refrigerator bulb that is the same shape and size.
• Replace the light bulb cover.
1
2
WARNING: There are two holes (FF8Y/FF8YSS) and five holes (FF12Y) near the temperature
control knob. The purpose of these holes is to let cold air flow from the freezer to the
refrigerator section. Inside these holes there is an inner piece of styrofoam material that
enables the temperature control box to operate properly. Please do not remove them
under any circumstances.
FF12Y
FF8Y/FF8YSS
FF8Y/FF8YSS/FF12Y-¿ „fi 00.6.20 4:31 PM ˘
`
11
