Avanti BCA184BG, Инструкция по эксплуатации

Страница: 10 / 16

10

Long vacations: If the appliance will not be used for several months, remove all beverages and
unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth,
leave the door open slightly: blocking it open if necessary.

Moving Your Unit

Remove all of the beverages.

Securely tape down all loose items inside your unit.

Turn the leveling legs up to the base to avoid damage.

Tape the door shut.

Be sure the unit stays secure in the upright position during transportation. Also protect the
outside of unit with a blanket, or similar item.

Energy Saving Tips

The unit should be located in the coolest area of the room, away from heat producing appliances,
and out of the direct sunlight.

Let hot foods cool to room temperature before placing in the unit. Overloading the unit forces the
compressor to run longer.

Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts
down on frost build-up inside the unit.

Unit storage bin should not be lined with aluminum foil, wax paper, or paper toweling. Liners
interfere with cold air circulation, making the unit less efficient.

Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
PROBLEMS WITH YOUR REFRIGERATOR ?
You can solve many common unit problems easily, saving you the cost of a possible service call. Try
the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE
Unit does not operate.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The unit temperature control is set at “OFF”
position.
Turns on and off frequently. The room temperature is hotter than normal.
A large amount of food has been added to the
unit.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The unit does not have the correct clearances.
Vibrations. Check to assure that the unit is level.
The unit seems to make too much noise.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
unit.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
The unit is not level.
The door will not close properly.
The unit is not level.
The door was reversed and not properly installed.
The gasket is dirty or bent.
The shelves, bins, or baskets are out of position.