Avanti BCA1501SS Скачать руководство пользователя страница 10

 

10 

OPERATING YOUR BEVERAGE CENTER

 

 

It is recommended you install the Beverage Center in a place where the ambient temperature is 
between 23º-26ºC/ 72º-78ºF.  If the ambient temperature is above or below recommended 
temperatures, the performance of the unit may be affected.  For example, placing your unit in extreme 
cold or hot conditions may cause interior temperatures to fluctuate.  The range of 5º-18ºC/40º-65ºF 
may not be reached. 
 
The temperature range of this Beverage Center is 1º-6ºC/34º-43ºF The preset temperature is 
3ºC/38ºF. 

 
 
 
 
 
 
 

 

 

ON/OFF POWER 

To turn OFF the appliance, touch the 

 mark and hold  for 2 seconds. 

 

 

Control Panel Lock. 

 

Your Beverage Center is equipped with an automatic Control panel lock function.  This 

function will prevent any unwanted changes to your temperature or power settings. 

 

The lock function will activate automatically 12 seconds after the last time a button is 

pushed on the control panel. 

 

To unlock the control panel lock press and hold the 

 and the 

 buttons for 3 seconds 

the control panel will beep and blink once indicating that the control panel is active and the 
settings can be changed.

 

 

 

SETTING THE TEMPERATURE CONTROL

 

 

You can set the temperature as you desire by touching the 

 or 

 mark. When you touch the 

two marks for the first time, the LED readout will show the original temperature set at previous 
time (the temperature preset at the factory is 3ºC/38ºF). 

 

The temperature that you desire to set will increase 1ºF or 1ºC if you touch the 

 mark once, on 

the contrary the temperature will decrease 1ºF or 1ºC if you touch the 

 mark once. 

 

The temperature inside the unit will be appeared in blue color in the display window.

 

 

NOTE: 

 

If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting 

the unit. If you attempt to restart before this time delay, the Beverage Center will not start. 

 

When you use the Beverage Center for the first time or restart the Beverage Center after having 

been shut off for a long time, there could be a few degrees variance between the temperature 
you select and the one indicated on the LED readout.  This is normal and it is due to the length 
of the activation time. Once the Beverage Center  is running for a few hours everything will be 
back to normal.

 

 
 
 

 

 

You can select temperature display setting from Fahrenheit to Celsius degree by touching the 

ºF/ºC

 

mark.  Fahrenheit or Celsius degrees indicator will appear in

 

blue color in the temperature display 

window.

 

 

Содержание BCA1501SS





















Отзывы: