SAFET
Y
INF
O
SET
UP
OP
ERA
TION
SUB
FINE
TUNING
MISC
W
ARRANT
Y
OP
ERA
TION
TRIO
SAFET
Y
INF
O
SET
UP
OP
ERA
TION
SUB
FINE
TUNING
MISC
W
ARRANT
Y
OP
ERA
TION
TRIO
14
15
CONNECTION – TRIO G3 PASSIVE VERSION
SINGLE–WIRING
Tweeter
, midrange
and lowrange
drivers have dedicated
speaker terminals. In the standard conf iguration, these terminals
are interconnected with two OFC Trident Bridge
&
. One bridge
interconnects all “+” connectors, the other one
all “
–
“
connectors.
Connect the speaker terminal
of the TRIO G3 speakers and the
speaker-level input terminal of the SPACEHORNS with the long
jumper cable. The jumper cable is included in the accessory box.
If you use more than 1 x subwoofer per channel, connect speaker-
level input terminal of the SPACEHORNS No.1 and speaker-level
input terminal of the SPACEHORNS No.2 with the shorter jumper
cable. The jumper cable is included in the accessory box.
�
The jumper cables have hollow banana plugs which are open at
the rear. This way it is possible to stack multiple speaker cables to
the same speaker terminal.
Connect the Speaker–Output of your power (or integrated)
amplif ier with the speaker MID terminal
of the TRIO G3 speakers.
Only now, connect the AC power cords of the components to a
household AC outlet and turn on the subwoofer and the other
equipment.
�
The cable at the INTERNAL CONNECT PORT is a non-serviceable
internal connection! Do not unplug.
11
14
15
16
12
1
2
1
2
3
4
CONNECTION – TRIO G3 PASSIVE VERSION
TRI–WIRING
To operate the system in TRI–Wiring or TRI–Amping mode, the two
OFC Trident Bridge
&
need to be removed.
Open the screw caps of Tweeter
, midrange
and lowrange
speaker terminals and remove the two OFC Trident Bridges
&
.
Connect the Speaker–Output of your power (or integrated)
amplif ier with the speaker terminals
of the TRIO G3 speakers
using a dedicated cable for each connection. The same applies
when using multiple amplif iers for treble, midrange and bass.
14
15
16
OP
ERA
TION
TRIO
OP
ERA
TION
TRIO
