ID
:
025719
Revision: 1-00
8
© Avantes BV
After the ‘settle time’ the ‘minimal time’ will be used.
The ‘minimal time’ represents the minimum time of the measurement at the position that is set. If
the total amount of measurements will take more time than the ‘minimal time’ this will be
overruled.
The ‘Current Channel’ drop down box lets you change channels manually. If you have selected timer
operation in the ‘Options’ dialog box, it will be dimmed.
When operating in timer mode, the time to the next switch will be displayed in the next line.
3.3
Correction for drift:
The combination of FOS-2-INL and spectrometer can also be used for correction for drift
You can use the second channel to correct the first channel for drift, e.g. resulting from slow
deterioration of the lamp intensity.
First you have to set-up the accessory as FOS-2-INL as described above.
Select ‘Options’, ‘Correct for Drift Channel’
Select the channel in the ‘Correction Source (reference)’ drop down box that you want to use to
correct the other channel.
Leave the checkbox in the ‘Correct’ column unchecked for now.
