24-08-04
AvaLight-CAL manual.doc
1
Avantes
www.avantes.com
AvaLight-CAL Spectral Calibration Light Source
Safety Instructions
Instructions:
All the safety and operating instructions should be read before the unit is operated.
Before using the power supply for the first time check for transport damage.
Warning:
All warnings on the unit and in the operating instructions should be adhered to.
Unpacking Instructions:
Your package should contain:
1 – AvaLight-CAL
1 - This manual
! You need a Power Supply 12VDC, we recommend our PS-12VDC/1.25A
1)
Unpack your lamp assembly carefully. Although the lamp is rigidly mounted dropping this
instrument can cause permanent damage.
2)
Inspect the outside of the instrument and make sure that there is no damage to your unit. In
case of damage contact the dealer immediately and DO NOT USE THE INSTRUMENT!
3)
Use this instrument in a clean laboratory environment.
Moisture
The unit is designed for operation in dry rooms only.
Ventilation
The unit should be situated so that its location or position does not interfere with its proper ventilation.
Heat
The unit should be situated away from radiators, hot bodies, ovens or other heat sources.
Power Sources
The unit should be connected to a power supply only of the type described in the operating instructions
or as marked on the unit. 12 VDC 1000mA analogue regulated (Code: PS 12VDC/1.25A)
Object and Liquid Entry
Care should be taken that objects do not fall, or liquids spilled into the enclosure through openings.
Caution:
This lamp produces ultra violet radiation, which can be harmful to the eyes. DO NOT LOOK INTO
THE LIGHT BEAM. THIS CAN CAUSE PERMANENT EYE DAMAGE - WEAR PROTECTIVE
EYE WEAR - CALL YOUR LOCAL DISTRIBUTOR FOR GLASSES OR GOGGLES. This unit is
supplied with a mechanical safety device - Before removing this Safety Device be sure that the power
is off, and screw in the fiber optic cable first before starting the instrument.
