avantec DT910N, Руководство пользователя, Страница: 10 / 26

10
6. Clock / Alarm
6.1 Real Time Clock
6.1.1 Manual Setting
1.
In standby mode, press key to enter the handset menu.
2. Press key until “ CLOCK/ALARM ” is displayed.
3. Press key, “ DATE & TIME ” is
displayed.
4. Press key to enter the date and
time setting screen.
5. Press / key to enter the current date
and time in 12H format.
6. Press key to save the new setting.
7. Press key to go back to standby screen.
6.1.2 Automatic Setting
Provided that this service is enabled by the network, the time clock
will be automatically updated upon receiving a CLI (Caller ID).
6.2 Set Alarm
1. In standby mode, press key to enter the handset menu.
2. Press key until “ CLOCK/ALARM ” is displayed.
3. Press key, “ DATE & TIME ” is displayed.
4. Press key until “ SET ALARM ” is displayed.
5. Press key, “ON ONCE” is displayed.
6. Use the / key to select between “ON
DAILY” or “ON ONCE” and Press
key to confirm.
7. Use the / key to set the alarm “ON” or
“OFF”.
8. Press key to set the alarm ON, then
use the / key to enter the alarm time,
AM or PM.
9. After the alarm is set, press key to
save the change.
10. Press key to go back to standby
screen.