User Manual
4 www.AvantcoEquipment.com
Assembly Instructions
Before Using Your Oven
PLEASE NOTE: Improper assembly of the flip up handle to the grill could cause
the grill to turn or fall off when moving product, possibly causing injury or burns.
1. Ensure that there is at least 12 inches of clearance on all sides, including the top and back of
the unit.
2. The oven should be installed on a flat, sturdy surface.
3. Be sure that the unit is properly grounded and only plugged into a grounded, 3-hole NEMA
5-15R outlet to minimize shock or fire hazard.
4. Line up the unit handle and panel together, being sure that the handle will flip upwards.
5. To insert the grill, insert the hook into the oval opening on the panel. The hook will be
facing upwards when installing.
6. Place the washer on the bolt and insert into the top round hole through the handle and
panel.
7. Secure tightly when a screw from behind the panel.
Using a small amount of detergent, wash the rack with soapy water. (NOTE: Do not use a
spray or abrasive polishing agent.) Gently wipe down interior walls with a damp cloth. While
washing this unit, do not touch the electric heating element. Do not soak the inside of the
oven with water.
After cleaning as noted above, close the door and set timer for 5 minutes.
After the timer has reset to zero, open the oven door in order to remove any smoky residue
from inside the oven. The heating elements are well lubricated and this initial use will help
burn off the extra grease. A light amount of smoke is normal during this process.