- 3 -
User Manual
•
•
• Make sure all accessories are installed (shelves, shelf clips, etc…) before plugging in the unit.
•
• Do not stand inside the unit.
• Please read through this manual in its entirety.
•
Cabinet Location Guides
• Install the unit on a strong and leveled surface.
- If the surface is uneven, the unit may be noisy.
- The unit may malfunction if the surface is uneven.
• Install the unit in an indoor, well ventilated area away from doors, air ducts, and fans.
- For best performance, maintain 6” of clearance on the back of the unit at all times.
- Do not use outdoors. For indoor use only.
- Avoid direct sunlight.
• Avoid installation in a high humidity and / or dusty area.
- High humidity can cause the unit to rust and may decrease efficiency.
- Dust collected on the condenser coil may cause unit to malfunction.
-
• Select a location away from heat and moisture-generating equipment.
- High ambient temperatures may cause the compressor to malfunction.
- Malfunction due to high ambient temperatures and humidity will void the warranty.
Do not attempt to remove or repair any component of the unit. Consult an authorized service
technician for servicing / repair.
Malfunction due to high ambient temperatures, humidity, or improperly maintained
condenser coil will void the warranty.
If the unit has recently been transported on its side, please let the unit stand upright for a
minimum of 24 hours before plugging it in.
Make sure the unit has reached the desired temperature before loading the unit with products.
This unit is meant for keeping cold products cold, not chilling warm products.
Installation
Please read this manual thoroughly prior to equipment set-up, operation and maintenance.
This unit is intended for use in a temperature-controlled environment less than 75
º
F and
5
relative humidity. Malfunction due to improper conditions is not covered under warranty.
Important!!!
Please Read Before Installation
This refrigerator is designed to perform in a temperature-controlled environment less than 75
°
F
and
5 5
% relative humidity. The unit should be located away from doors, air ducts, and fans
that could disrupt airflow and negatively impact performance.
