- 5 -
User Manual
Defrost System
To ensure optimal performance, unit should be placed into a defrost when the thickness of the ice on
the cabinet wall reaches 1/4”. To defrost, the unit must be free of product and left unplugged or put
in a manual defrost cycle until the ice build up melts. Do not use sharp tools or scrape the ice, this
could damage the interior of the cabinet. After defrosting, clean the wall with a dry cloth and then
turn the power back on.
To run a manual defrost, press the defrost button (snoflakes symbol and down arrow) for
approximately 3 seconds. Repeat to stop the defrost cycle.
Please Note:
• The sound of water flowing during operation is normal; this is the refrigerant.
• When the humidity is high, condensation may form on the surface of the freezer.
• When the freezer is running, the condenser and compressor will be hot.
• For best performance, install where the temperature is below 75
°
F and 55% humidity.
