1
.
.
r-
7
2
1
3
4
5
6
7
Sleeve
1
1
2
1
1
1
1
Descviption
Qty
Gasket
User Manual
14
www.AvantcoEquipment.com
Troubleshooting
Trouble
Possible Causes
Solution
The axles can’t work when
operating the machine
Poor contact of the electrical
equipment
Check the Plug
The mixing bowl is out of position
Moving direction is not correct
Change
Leaks oil
Sealing washer is damaged
Change
Difficult to move the bowl up and down
Slideway is rusted
Clean the slideway and lubricate
The motor is overheated
and speed is down
The voltage is not enough, or
incorrect speed
Check the voltage or use
lower speed
Noise and overheating
Poor lubrication
Add or change lubrication
Mixer touches bowl
The mixing device or bowl de-
formed
Repair or change the bowl
or mixing device
Cleaning
WARNING: DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE CLEANING
!
All new mixer bowls and accessories including whips, beaters, and dough hooks should be properly washed before use.
Wash with hot water and a mild soap solution and then rinse off with either a mild vinegar or soda solution and then rinse
again with clean water. It is highly recommended this cleaning procedure is followed for bowls and accessories prior to
whipping egg whites or whole eggs. The mixer should be cleaned daily with a clean damp cloth.
If the unit has not been used for some time, it is recommended that the procedure above is followed before mixer use.
It is important that the rear bowl lift guides are greased every three months to prevent corrosion.
