User Manual
12
www.AvantcoEquipment.com
User Manual
www.Avantco.com
12
User Manual
SHARPENING INSTRUCTIONS
CAUTION
THE KNIFE SHOULD BE SHARPENED WHEN THE SLICE QUALITY OF
THE PRODUCT IS NOT ACCEPTABLE
DO NOT SHARPEN A KNIFE THAT IS NOT CLEAN. YOU WILL DAMAGE
THE SHARPENING STONES AND BE UNABLE TO SHARPEN THE KNIFE
1.
Switch OFF the power.
2.
Unplug the slicer.
3.
Turn the thickness control knob fully to the right to place the gauge plate in the
fully
closed position.
4.
Clean the knife completely. Always clean from the center towards the outside
edge of
the knife. Never move your hand towards the edge of the knife.
5.
Loosen the sharpener locking knob, raise and rotate the sharpener until the
stones sit
with one on each side of the knife. Retighten the knob to hold the
sharpener in its
sharpening position.
6.
Plug in the slicer and switch on the power.
7.
Press the sharpening stone push-button to bring the stone against the knife and
hold it
for 5 to 10 seconds and release. When the sharpener is the in the sharpening
position, the
sharpening stone push-button is on the left side of the knife.
8.
Press the deburring stone push-button to bring the stone against the knife and hold
it for
2 to 3 seconds and release. When the sharpener is the in the sharpening
position, the
sharpening stone push-button is on the right side of the knife.
9.
Switch OFF the power.
10.
Return the sharpener to its stored position and lock in place.
11. Clean slicer before slicing product. (See “Cleaning and Sanitizing instruction” ).
Your slicer is now sharpened, cleaned and sanitized—ready to use.
