User Manual
www.AvantcoEquipment.com 7
Typical Operation Sequence
ACTION
RESULT
Plug in your steamer
Power is connected; unit will begin to heat
Load product into steamer
Product is ready to steam
Press steam button for 2 seconds,
release, and wait 20 seconds
Unit fills body with steam, which penetrates the product
Unload steamer
Product will be hot; use caution removing it
Cleaning & Maintaining Your Steamer
Daily cleaning is recommended for maximum service life. Do not immerse steamer in water or other liquid; it may cause
the electrical components to short circuit or to produce an electrical shock.
Daily Maintenance
1. Pour 1 Cup of White Vinegar into the tank
2. Cycle the steamer by pressing the steam button for 3-5 seconds, and wait 20 seconds between presses
3. After vinegar is cycled through, pour 1 Cup of Distilled Water into the tank, and continue to cycle until all vinegar is cleared
from the internals of the steamer.
NOTE: White vinegar or similar solvent will help eliminate calcium and mineral build-up in the steamer. Without proper
maintenance, the build-up will act as a thermal insulator leading to degraded performance and shortened lifespan.
4. Flip on/off switch to the “off” position. Disconnect power cord from electrical outlet.
5. Let steamer cool for 45 minutes.
6. Use a sponge or damp cloth and hot soapy water to wipe down unit
7. Rinse with clean, damp cloth
8. Wipe dry
Weekly Maintenance
1. Follow steps 1-8 above
2. Open the steamer lid, remove pan and lift loose end of spray tube and pull it out of the generator hole
3. Slide off metal spray tube cover and remove water tank filter from water tank
4. Place the spray tube and water tank filter in a container and cover with white vinegar, let soak for 15 minutes
