AVANT e5 2018, Руководство оператора

Страница: 69 / 108

Avant e5
69
Storage, Transport, Tie down points and
Lifting
Before transporting or lifting:

Mount the articulation frame lock, see page 84

Lower the boom down
Always lock the frame lock before transporting or
lifting the loader. Also remember to remove the
frame lock and test the steering of the loader after
transport.
.
Tie down points
The loader must be tied down securely if transporting
on a trailer. All four tie down points must be used. If
an attachment is fitted, also t must be tied down.
As standard, there are 4 tie down points:

Two on the front frame, close to the boom

Two on the rear frame, near rear counterweight
To prepare the loader for transport, do the
following:
1.
Always secure the load. Make sure all
equipment is secured also before just a short
transport.

It may be necessary to tie down attachments
separately.
2.
Lower boom completely down.
3.
Lock the articulated frame lock.
4.
Always use straps or chains that are in good
condition and rated for use as load securing
device. Check all hooks and locks.
5.
Consider weight distribution on a trailer.
Sometimes it might be appropriate to load the
loader on trailer rear end first.
6.
Always make sure the trailer is balanced when
loaded in sideways and front/rear directions.
Trailer must never cause upward force on the
trailer coupling of the towing vehicle.
7.
Make sure all panels are locked in place.
Remove ignition key and any loose material
that could come off while transport.
8.
Consider using a transport cover to protect the
loader from dirt during transport. See picture
below.