18 (32)
.
6.1
Checks before use
Read all instructions before use. Make sure you have the Operator's manual of the loader available.
Check the general condition of the attachment and the loader, and check for possible hydraulic oil
leaks. The attachment must not be used, if there is a fault in the hydraulic system of the loader or the
attachment. Refer to Chapter 7 for maintenance instructions.
Check the condition of the auger and the throwing rotor, and that they can rotate freely. Check that
there is no string or other foreign material coiled around them.
Check that the discharge chute rotation works smoothly as intended, and that the rotation is not
blocked. Set the throwing height to correct setting and direct the chute to safe direction.
Check the setting of the side skids and edge plate. See Chapter 6.4.
Before starting work, remove larger obstacles from the working area that may damage the snow
blower. Remember correct working methods and avoid leaving the driver’s seat unnecessarily.
Drive carefully on uneven terrain and note the effect of heavy load at the front of the loader to the
stability and handling of the loader.
Ensure that bystanders are at a safe distance when operating the equipment. Do not let anyone to
enter danger area of the boom or to stay directly in front of the loader. Also make sure that it is safe to
reverse with the loader. Never assume that bystanders will remain where you last saw them;
especially children are often attracted to the moving equipment.
Operate the attachment and the controls of the loader only when seated on the driver’s seat. Ensure
that the loader and the attachment are used in a safe manner and as intended. Do not allow children
to operate the equipment.
Never operate the loader or attachments while under the influence of alcohol, drugs, medication that
may impair judgement or cause drowsiness, or if not otherwise medically fit to operate the equipment.
Remember correct working methods and avoid leaving the driver's seat unnecessarily. Practise the
use of the attachment and the controls of the loader in a safe area. If you are unfamiliar with the
particular loader model, it is recommended to practise its use without any attachments.
.
..
WARNING
Make sure that the discharge chute guard is locked in its place before operating
the snow blower.
Using the snow blower without the guard in its place is prohibited.
Ensure that the chute is directed towards safe direction before starting the snow blower.
Operate the manual throwing height adjustment only when the attachment is stopped.
.
..
Overheating of hydraulic oil decreases power and affects the service life of the hydraulic
components of both the attachment and the loader. Clean the loader oil cooler core
regularly; refer to the loader manual for more instructions. Poorly performing cooler may
cause the hydraulic oil to overheat also in winter conditions.
