16 (24)
6.2
Use
The leveller is intended to be used by reversing with the loader. This way the wheels of the loader do not
leave track marks on levelled surface.
Using the Leveller
1.
Set the attachment to working position,
as shown in adjacent figure.
2.
Set the cultivating blade shaft to desired
position. See "
3.
Break the soil surface by pushing the
Leveller slightly against the ground with
the loader.
Depending on type of soil it may be
useful to tilt the leveller so that the front
or rear edge of it are more against the
ground.
If you want to use the Leveller when driving forwards; first, turn the cultivating blade shaft off the
ground. See "
Always drive slowly while operating the Leveller. Adjust the drive speed according to the operating
conditions and the ground.
If your loader is equipped with a telescopic boom, you can utilize it for a better view to the working
area.
Avoid sharp turns while operating the Leveller. Lift the attachment off the ground before
sharp turns.
6.2.1
Adjusting cultivation depth
An additional cultivating blade shaft can be
lowered to help to loosen the top soil with the
leveller. Before levelling adjust the cultivation
depth by setting the cultivating blade shaft
height to one of the twelve possible options
parallel on both sides.
