15 (26)
5.2
Electric connection
If the timber grab is equipped with the hydraulic rotator, its cable harness must be connected to the loader.
There are two options for the electrical connection:
To operate the control valve, its cable harness A34731, delivered with
the attachment and equipped with a 2-position switch, is connected to
the 12 V outlet on the loader. Select the location of the switch in the
cab where it is easily accessible but will not be used inadvertently.
Alternatively, the optional attachment control switch pack can be used
to choose the operating mode In this case, the separate cable with the
switch is not needed, and the plug of the attachment can be connected
directly to the socket on the loader boom. The mode is selected with
the switch number 1.
Route the selected cable in a way that it cannot get stuck or squeezed or stretch when the equipment moves.
With the help of the attachment control switch pack available for the loader, the attachment control switches
are easily accessible at the end of the boom control lever. Instructions about the power outlet of the loader
can be found in the operator’s manual of the loader.
