21 (30)
6.4
Horizontal adjustment
It is possible to set the side shift adapter so that the quick coupling plate shifts the attachments 500 mm to the
left or to the right. After the position is set as illustrated in the figures below, it possible to shift the attachment
only to the right, as seen from the driver's seat of the loader. The opposite direction is adjusted in a similar
way.
Set and adjust the side shift adapter to correct operating position as follows:
1.
Shut down the loader and place the
attachment to a safe position as
shown in safe stopping procedure.
2.
Remove the fixing bolts (1) [4 pcs] of
the quick coupling plate (2).
3.
Move the quick coupling plate (2)
manually to the right until the fixing
points are aligned. Fasten the fixing
bolts (1) [4 pcs] of the quick attach
plate.
4.
Now, it is possible to shift the
attachment 500 mm to the left, when
seen from the driver's seat.
