AVANT A21342 Скачать руководство пользователя страница 16

Страница: 16 / 34

16 (34)

Disconnecting hydraulic hoses:

Before disconnecting the fittings, lower the attachment to safe position on solid and level surface. Turn the

control lever of the auxiliary hydraulics to its neutral position.

When uncoupling the attachment, always disconnect the hydraulic couplings before

unlocking the quick attach plate, to prevent hose damage and any oil spills. Reinstall the

protective caps on the fittings to prevent impurities from entering the hydraulic system.

Releasing residual hydraulic pressure:

In case residual pressure is left in the hydraulic system of the attachment, it is often possible to disconnect the

hydraulic couplings, but it may be difficult to connect them the next time. If the fittings will not connect, the

residual pressure must be released by turning the auxiliary hydraulics control lever of the loader, when the

engine is turned off. To make sure that there will not be residual pressure in the hydraulic system of the

attachment, shut down the loader engine and move the auxiliary hydraulics control lever of the loader back

and forth before disconnecting the couplings.

Содержание A21342



































Результаты поиска

Содержание A21342

Отзывы:

Похожие инструкции для A21342

Бренды по названию

Популярные бренды

AVANT A21342, Руководство оператора

Результаты поиска

Содержание A21342

Отзывы:

Похожие инструкции для A21342

Бренды по названию

Популярные бренды