AVANT 755 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 40

background image

15

755/760i

Operating instructions

Control of loader boom, auxiliary hydraulics and other functions

Most of the functions of the loader are controlled at the control panel on the right side of the operator: Boom and bucket
movements, auxiliary hydraulics (attachments), engine revs etc. , depending on loader model. Following pictures show the
different functions:

Attachment control
switch pack (option)

• Optional extra with which

electric functions of the
attachment are controlled

• Consists of 3 pcs control

switches, wiring and a 7-pole
socket which mounts on the
auxiliary hydraulics multi
connector (see page 8). The
corresponding socket of the
attachment electric wire is
mounted on the attachment
multi connector. This way
both the electric wire and
the hydraulic hoses of the
attachments are connected
at the same time with the
multi connector.

• Read the operator’s manual

of the attachment to see how
the switches are used with
each attachment.

5. Control lever of boom and bucket

(Functions of the electric joystick are explained on page 19)
  • Pull backward to lift the boom
  • Push forward to lower the boom
  • Push left to raise the tip of the bucket (filling)
  • Push right to lower the tip of the bucket (emptying)

6. Hand throttle lever

• Push forward to increase engine revs
• Pull backward to reduce engine revs

7. Control lever of auxiliary hydraulics

(hydraulically operated attachments)

• Push forward carefully to test the operating direction

of the attachment

• For continuous operation of rotating atatchments,

push forward & turn right to locking position

• Pull backward to operate the attachment in reversed

direction

• When using the electric joystick, this lever will

also move. Either way can be used to control the
attachment as needed.

8. Control lever of telescopic boom

• Push forward to extend the boom
• Pull backward to retract the boom

9. Control lever of rear or extra front auxiliary
hydraulics outlet (optional extra)

• Operates in similar way as the lever no 7.
• See page 20 for further instructions

10. Selection lever of the pumps for auxiliary
hydraulics

• Lever in front position (1-pump): one pump

coupled for auxiliary hydraulics (lower oil flow).
Use this setting unless higher hydraulic flow to the
attachment is required.

• Lever in back position (2-pump): two pumps

coupled for auxiliary hydraulics

5

6

7

8

9

10

«
...
13
14
15
16
17
...
»

Содержание 755









































Отзывы:

Нет отзывов

Похожие инструкции для 755

Бренд: jcb Страницы: 51

Бренд: Ditch Witch Страницы: 85

Бренд: Kubota Страницы: 142

PALLET FORK PF-448

Бренд: Worksaver Страницы: 30

Бренд: Toro Страницы: 13

Бренд: Pitney Bowes Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды