AVANT 744i, Руководство оператора

Страница: 73 / 146

Avant 755i 760i Controls and options of the Loader
73
Heating and ventilation
1. Heater
Heater temperature adjustment on cab LX/DLX is
located at the left side in front of seat. Air flow
temperature can be adjusted with the rotary switch of
the heater, located at seat base. Air flow can be
directed with the nozzles on the front panel and in
the footwell.
2. Air recirculation
For faster warm up of the loader, the cab is equipped
with an air recirculation system. When the hatch is
opened the heating system pulls air from the cab and
circulates it back into the cab through the nozzles.
This way the cab warms up quicker in cold weather.
The system can also be used for cooling.
If used for heating, switch off the
air circulation as soon as the
temperature in the cab is sufficient,
otherwise the cab keeps warming
up and moisture starts to condense
on the windows.
Fan speed control

On cab DLX fan speed switch is located in the
control panel at the up right corner of
windscreen.

On cab LX the fan speed switch is located in the
footwell, at the right side.
Cab air filter
A replaceable cab air filter can be changed from
outside the cab, under the door on the left side (see
picture below). The cartridge (part no. 65118) should
be changed more often in dusty environment.
WARNING
Risk of serious illness from
prolonged exposure to
crystalline silica - Do not
operate the loader without a cab
air filter cartridge in place. To
reduce exposure from silica dust
always keep the cab air filter in
good condition. Keep the cab door
and windows closed when
operating at area where dust is
present. Use a breathing mask
when at risk of being exposed to
silica or other types of dust. Using
the ventilation system without the
filter in place increases the level of
dust inside the cab.