700 Series
Load diagram
The lifting capacity of the loader is limited by the possibility of tipping around the front axle. The diagram
below shows the tipping loads and max. allowed loads in different loading situations on an even level surface
with the loader chassis in maximum articulation.
Description of the loader
11
50
10001
1500
2000
2500
0
500
1000
1500
2000
2500
3000
3500
4000
Tipping load with the loader
in max. articulation
Rear weight 170 kg
Driver 75 kg
Max. load, ISO 14397-1
The loader in max. articulation
Rear weight 170 kg
Driver 75 kg
Distance from front axle mm
AVANT 745/750 load diagram
The diagrams can be interpreted as follows:
The diagrams show tipping load and max. load with
the load at different distances
from the front axle of the loader
Example: If the center of gravity of the load is
750 mm in front of the front axle, max. load is about
1250 kg with a driver weighing 75 kg and with the
170 kg integrated rear weight mounted on the loader.
NOTICE:
If the driver leaves the machine, tipping
and max. loads are reduced respectively.
Tipping load and max. load depend both on the
weight of the driver and the eventual extra weights
mounted on the loader.
Please note that the diagrams are based on the
machine operating on a level, even and firm
supporting ground. Loads should be significantly
reduced when operating on gradients and/or on soft
ground.
The loader is equipped with a load sensor system,
which gives an audible warning signal and an indicator
lights up in the dashboard when tipping load is being
approached.
Read the safety instructions regarding handling of
heavier loads. Calibration instructions of the load
sensor system can be found on page 30.
0
500
1000
1500
2000
2500
3000
0
20
40
60
80
rpm
1 pump
2 pump
Max. auxiliary hydraulics oil
flow can not be used with all
attachments. Check correct
engine rpm and auxiliary
hydraulics pump configuration
for the attachment with the
help of this table and Operators
Manual of the attachment.
l/min
Auxiliary hydraulics oil flow
https://tractormanualz.com
