AVANT 313S 2018, Руководство оператора, Страница: 15 / 24

300S Series Stopping the engine
15
• Turn the ignition key to the OFF position (to the left)
• Turn the power off with the battery disconnect switch
NOTICE! The engine cannot start if the auxiliary hydraulics
control lever is in locking position or the pump selection
lever (on model 320S+) is in the position „2-pump“ (when
the ambient temperature is low)
STOPPING THE ENGINE
DRIVE CONTROL
Start the engine as explained on previous pages. When
starting the engine do not touch any control lever.
After starting the engine take a firm grip on the control
levers (see picture on the right). It is important to use
exactly this grip, it gives you the best possible feel on
the levers and control on the machine. This way you
will be able to control the machine smoothly and
securely right from the start.
Driving forward
Select first moderate engine revs by pressing the
throttle pedal and push carefully both drive control
levers forward until they are completely in the forward
position. The machine starts to go straight forward.
Do some training by repeating this movement so that
the machine starts smoothly – if you operate the
control levers abrubtly the movements will be jerky.
Drive speed can be increased with the throttle pedal.
The machine will stop as soon as one allows the levers
to return to center (neutral) position.
Reverse driving
Reverse driving happens exactly the same way as
driving forward, except that the drive control levers
are now being pulled backwards. Drive speed can be
increased with the throttle pedal. The machine will
stop as soon as one allows the levers to return to
center (neutral) position.
Turning
Turning of the machine is based on the skid steer
principle. When you want to turn the machine to a
direction, push/pull the drive control lever less on
the inner curve side. By doing this the inner wheels
brake and and consequently the machine turns.
If you want to turn the machine on the spot, push one
side drive control lever and pull the other side control
lever to the extreme end position.
Loader control
Loader boom and bucket tilt functions are operated
with the same multi-function levers as drive, by turning
them sideways.
Right side lever is for boom control
•Push right to lower the boom
•Push left to lift the boom
Left side lever is for attachment
(e.g. bucket) tilt control
•Push right to raise the tip of the bucket
•Push left to lower the tip of the bucket
Memory helper: By turning both levers inwards both
boom and tip of bucket rise.