AVANT 300S Series, Руководство оператора, Страница: 14 / 24

Starting the engine
14
300S Series
STARTING THE ENGINE
Petrol engine (Avant 313S, see also Honda engine
Owner‘s Manual)
• Turn the battery disconnect switch to ON
• Turn the fuel valve to the on ON position
(on the left side of the engine, see Honda Owner’s Manual)
• Move the choke lever to the left to CLOSE position
(above fuel valve, see Honda Owner‘s Manual)
NOTE: Do not use the choke if the engine is warm or
the air temperature is high
• Turn the ignition key to the right until engine starts, then
let the key return to ON position
• Reduce choke (move choke lever to the right) as soon as
engine has started, move completely to the right when
engine has warmed up
Diesel engine (Avant 314S, 320S and 320S+)
• Turn the battery disconnect switch to ON
• Turn the ignition key to the right, keep the ignition key in
this position for approx. 10 seconds, depending on the
ambient temperature.
ATTENTION There is no glow plug indicator lamp – do not
glow for more than 10 seconds at a time.
• Turn the ignition key further to the right until the engine
starts, then let the key return to ON position
1
2
1
2