USER GUIDE
Zero and Tare Functions
To weigh different items consecutively without removing from the scale, use the Zero and
Tare Functions.
1.
Place the first load within the center of the weighing area of the scale to take a
reading.
2.
Without removing the load, press the ‘ZERO’ button to reset the display to ‘0’.
3.
With the first load still in place, add the next load. The display will now show the
weight of the newly added load.
4.
Repeat this step until all items have been added.
NOTE: If the total weight of the loads being measured is below 200g (less than 4% of the
scale’s capacity) the Zero Function is in use and the Zero indicator
will be displayed.
If the total weight of the loads exceeds 200g (more than 4% scale’s capacity) the Tare
Function is in use and the Tare indicator will be displayed.
When Tare Function mode is activated – when pressing the ZERO button between loads
the LCD display will show the total weight of all loads on the scale (excluding bowl).
Press ZERO button again to reset the LCD reading to ‘0’ and continue with the next load.
Auto Shut Off
Auto Shut off occurs if display shows ‘0’ or the shows the same weight reading for 1
minute.
Note: This scaled does not have a manual Turn Off Function
Warning Indicators
1.
When LCD Display shows ‘Lo’, this indicates that battery needs replacing.
2.
When LCD Display shoes ‘Err’ this indicates maximum capacity has been exceeded.
Remove item to avoid damage to the scale. (Max weight capacity is 5kg/11 lb)
