AVANIT SHD5, Руководство пользователя, Страница: 133 / 140

Operation in a Unicable System
AVANIT SHD5 133
8.3 Installation
If the receiver is connected to a uni-
cable system, then RAPS installation will
automatically cancel. The window to
the right will open.
1.
Press the red function key (SHIFT) to
open the submenu Antenna Setup.
2. Select the menu item LNB Freq to
set Unicable(9750-10600) .
3. Press the green function key to
open the window Antenna Setup
Unicable Setting.
4. Select the menu item IF Channel
and set the IF channels (start with
channel 1; respectively allocate one
of the IF channels - in ascending or-
der - to the connected receivers).
5. Select the menu item
Center Freq
to set the frequency corresponding to the IF
channel (see allocation table).
6. Select the menu item
Sat Position
to set the respective satellite position.
7. Mark the button
Save
and press
OK
to save your entries and to return to the
first window
Antenna Setup
or
mark the button
Cancel
and press
OK
to discard any previous entries in this
window and to return to the first window Antenna Setup without saving.
8. Press the red function key to open
the window Antenna Setup Center
Freq.
9. Leave the menu by pressing EXIT
(settings will be saved).
RAPS installation will be continued
automatically.