4
3.
Do not place any magnetic objects like credit cards, cassettes etc. on the glass surface while the
device is in operation.
4.
In order to avoid overheating, do not place any aluminum foil or metal plates on the device.
5.
Do not insert any objects like wires or tools into the ventilation slots.
Attention: This may cause Electric Shock
6.
Do not touch the hot surface of the ceramic field. Please note: the induction hotplate does not
heat up itself during cooking, but the temperature of the cookware heats up the hotplate!
7.
Do not heat up any unopened tins on the induction hotplate. A heated tin could explode; therefore
remove the lid under all circumstances beforehand.
8.
Scientific tests have proven that induction hotplates do not pose a risk. However, persons with a
pacemaker should keep a minimum distance of 60 cm to the device while it is in operation.
Operating the device
Important: The device will not operate unless a suitable piece of Cookware is placed on the
surface
ON/OFF:
1.
Plug the power cord into a suitable outlet. The cooker automatically enters into standby state.
The buzzer will also beep as an alert and all the lights will begin to flash.
2.
Press "ON/OFF".
a.
The LED will display "----”.
b.
Press “Function” to enter into a Cooking Mode.
3.
If no function is selected in 30 seconds - the cooker will go back to the original power on state.
HOTPOT
1.
Press "Function" key and select "Hotpot" mode .
LED display should show “1100" and "Hotpot"& "Watt" lights are on.
2.
There are 8 power stages that can be adjusted by using the “+” and “-" keys.
The available power stages are 120W, 800W, 1000W, 1200W, 1400W, 1600W, 1800W, and
2000W. Power stages 120W and 800W are interval heating.
STEAM
1.
Press "Function" key and select "Steam" mode. The "Steam" and “Watt" indicators will light up.
The LED display will show default power.
2.
This mode is intelligent and the built-in controller will continue working according to the
program that is set. The default time is 50 minutes but you can set the timer to auto-stop by using
the adjust key.
STIR-FRY
1.
Press "Function" key and select "Stir-Fry" mode. The "Stir-Fry" and “Temp" indicators will light
up.
The LED display will show 270 which means the temperature is 270 degrees Celsius.
2.
This mode is intelligent and the built-in controller will continue working according to the
program that is set. The default time is 30 minutes but you can set the timer to auto-stop by using
the adjust key.