4
ELECTRIC REQUIREMENTS
Voltage: 220-240V.A.C
Hertz: 50Hz
Power Output: 350W
PREPARATION
Before connecting your Avancer Bullet Blender to a power point, check that you are connected to 220-240V
AC 50Hz main power, which is the standard in Australian households.
Assembly
Important Notices prior to using
NOTE
: Before using the product for the first time, disassemble and thoroughly wash and dry all parts
except the Base (Pitcher, Pitcher Lid, Juice Extractor Screen, Plunger, both sets of Blades, Rubber Gasket,
Mugs, Comfort Rings, Small Cup, Large Cup, and Lids).
WARNING
: Ensure the product is unplugged from the electrical outlet before assembling it. Handle the
Blades with care as they are extremely sharp. Use caution when attaching, detaching, cleaning, or storing
the Blades.
CHOPPER:
Attaches to the main body and efficiently chops a variety of fruits, vegetables and meats. If chopping
a large amount of ingredients, divide the food into smaller batches. Chop meat with every piece
weighing not more than 10 gram and overall not more than 100 gram
COFFEE GRINDER
The Blender can be used to grind coffee effectively by using the Flat Blades.
Ensure you do not have more than 100g of Beans. Grinding will take around 15 seconds and may
require a number of cycles to ensure the finest grind.
BLENDER
To operate as a standard blender choose your cup size and appropriate blade for the task.
You can fill the cups up to 300g and it is not recommended to fill completely. Overfilling the Cups
could result in spillage, causing burns and/or property/product damage. Rated capacity not more
than 0.3L is recommended. Blend contents within 30 seconds and stop after 2 minutes. Do not use
continuously for more than 5 seconds at a time.
1.
Ensure the product is unplugged from the electrical outlet.
2.
Place the Base on a flat, level, stable surface.
3.
Fill the Small Cup or the Large Cup with the meat and slice into pieces.
4.
Screw the Cross Blades clockwise onto the Small or Large Cup until secure.
NOTE
: Ensure that the rubber gasket, located on the inside bottom edge of the blade assembly, is in
place.
5.
Turn the Chopper Assembly so that the Blades are on the bottom. Attach the assembled Chopper
by aligning the four tabs on the outside of the Small or Large Cup with the four notches on the top
inner edge of the Base.
Содержание AVBUBLVAA
Страница 1: ...1 AVBUBLVAA BULLET MINI BLENDER 350W ...
