Avalue Technology HID-2334 Скачать руководство пользователя страница 12

Страница: 12 / 62

HID-2334 User Manual

HID-2334 Quick Reference Guide



Connect the equipment into an outlet on a circuit different from the one the receiver is

connected to.



Consult the dealer or an experienced radio/TV technician for help.

Notice:

(1) A Unshielded-type power cord is required in order to meet FCC emission limits and

also to prevent interference to the nearby radio and television reception. It is

essential that only the supplied power cord by used.

(2) Use only shielded cables to connect I/O devices to this equipment.

(3) Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for

an uncontrolled environment. This equipment should be installed and

operated with minimum distance 20cm between the radiator & your body.

For product available in the USA/Canada market, only channel 1~11 can

be operated. Selection of other channels is not possible. The antenna(s)

used for this transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter. Shielded interface

cables must be used in order to comply with emission limits.

Содержание HID-2334































































Результаты поиска

Содержание HID-2334

Отзывы:

Похожие инструкции для HID-2334

Бренды по названию

Популярные бренды

Avalue Technology HID-2334, Руководство пользователя

Результаты поиска

Содержание HID-2334

Отзывы:

Похожие инструкции для HID-2334

Бренды по названию

Популярные бренды