Avalue Technology ESM-KBLU Скачать руководство пользователя страница 9

Страница: 9 / 99

ESM-KBLU User

’s Manual

ESM-KBLU User

’s Manual

1.4 Manual Objectives

This manual describes in details

the

ESM-KBLU Single Board.

We have tried to include as much information as possible but we have not duplicated

information that is provided in the standard IBM Technical References, unless it proved to

be necessary to aid in the understanding of this board.

We strongly recommend that you study this manual carefully before attempting to set up

ESM-KBLU series or change the standard configurations. Whilst all the necessary

information is available in this manual we would recommend that unless you are confident,

you contact your supplier for guidance.

Please be aware that it is possible to create configurations within the NVRAM that make

booting impossible. If this should happen, clear the NVRAM settings, (see the description of

the Jumper Settings for details).

If you have any suggestions or find any errors regarding this manual and want to inform us

of these, please contact our Customer Service department with the relevant details.

Содержание ESM-KBLU




































































































Результаты поиска

Содержание ESM-KBLU

Отзывы:

Avalue Technology ESM-KBLU, Руководство пользователя, Страница: 9 / 99

Результаты поиска

Содержание ESM-KBLU

Отзывы: