Avalue Technology EMX-VX11P Скачать руководство пользователя страница 10

Страница: 10 / 75

EMX-VX11P

User’s Manual

10 EMX-VX11P

User’s Manual

1.4 Manual Objectives

This manual describes in details Avalue Technology EMX-VX11P Single Board.

We have tried to include as much information as possible but we have not duplicated

information that is provided in the standard IBM Technical References, unless it proved to

be necessary to aid in the understanding of this board.

We strongly recommend that you study this manual carefully before attempting to set up

EMX-VX11P or change the standard configurations. Whilst all the necessary information is

available in this manual we would recommend that unless you are confident, you contact

your supplier for guidance.

Please be aware that it is possible to create configurations within the CMOS RAM that

make booting impossible. If this should happen, clear the CMOS settings, (see the

description of the Jumper Settings for details).

If you have any suggestions or find any errors regarding this manual and want to inform us

of these, please contact our Customer Service department with the relevant details.

Содержание EMX-VX11P












































































Результаты поиска

Содержание EMX-VX11P

Отзывы:

Похожие инструкции для EMX-VX11P

Бренды по названию

Популярные бренды

Avalue Technology EMX-VX11P, Руководство пользователя

Результаты поиска

Содержание EMX-VX11P

Отзывы:

Похожие инструкции для EMX-VX11P

Бренды по названию

Популярные бренды