background image

EMX-GM45E 

56 EMX-GM45E User

‟s Manual

 

 

 

This item allows you to enable/disable the PCI Express PME Function. 

Options: Enabled, Disabled. 

3.5.5.2 

ACPI Function 

This item allows you to enable/disable the ACPI function. 

Options: Enabled, Disabled. 

3.5.5.3 

ACPI Suspend Type 

This item will set which ACPI suspend type will be used. 

Options: S1(POS), S3(STR).S1&S3. 

3.5.5.4 

Run VGABIOS if S3 Resume 

There are 3 modes for you to decide to operate VGABIOS or not when the ACPI suspend 

type is S3. 

Options: Auto, Yes, No. 

3.5.5.5 

Power Management 

This category allows you to select the type (or degree) of power saving and is directly 

related to the following modes: 

 

Item 

Description 

User Defined 

Allows you to set each mode individually.    When not disabled, each of the 
ranges are from 1 min. to 1 hr. except for HDD Power Down which ranges 
from 1 min. to 15 min. and disable. 

Min. Saving 

Minimum power management, 
HDD Power Down = 15 Min, 

Max. Saving 

Maximum power management,   
HDD Power Down =1 Min, 

3.5.5.6 

Video Off Method 

This determines the manner in which the monitor is blanked. 

Options: Blank Screen, V/H SYNC+Blank, DPMS. 

3.5.5.7 

Video Off In Suspend 

This determines the manner in which the monitor is blanked. 

Options: No, Yes. 

3.5.5.8 

Suspend Type 

This function allows to select Suspend type. 

Options: Stop Grant, PwrOn Suspend. 

3.5.5.9 

MODEM Use IRQ 

This determines the IRQ in which the MODEM can use

Options: NA, 3, 4, 5, 7, 9, 10, 11. 

3.5.5.10  Suspended Mode 

It specifies the length of time of system inactivity while in full power on state before the 

computer enters suspend mode and motivates the enable 'Wake Up Events In Doze & 

Standby' / 'PM Events'.

 

Options: Disabled, 1, 2, 4, 8, 12, 20, 30, 40 mins, 1 hr. 

Содержание EMX-GM45E




































































Отзывы: