EMX-945GSE-A1-DVIR
26 EMX-945GSE-A1-DVIR User
’s Manual
2. Serial Port connectors (9-pin COM3, COM4)
This connector is for a serial (COM) port. Connect the serial port module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
3. CPU, Power and Chassis fan connectors (3-pin CHA_FAN)
The fan connectors support cooling fans of 350mA~740mA (8.88W max.) or a total of
1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the fan connectors on the
motherboard, making sure that the black wire of each cable matches the ground pin of the
connector.
Do not forget to connect the fan cables to the fan connectors. Insufficient
air flow inside the system may damage the motherboard components.
These are not jumpers! DO NOT place jumper caps on the fan
connectors.
Содержание EMX-945GSE-A1-DVIR
Страница 16: ...EMX 945GSE A1 DVIR 16 EMX 945GSE A1 DVIR User s Manual 1 5 3 Motherboard Layout...
Страница 32: ...EMX 945GSE A1 DVIR 32 EMX 945GSE A1 DVIR User s Manual 13 LVDS Connector 40 pin JLVDS...
Страница 47: ...User s Manual EMX 945GSE A1 DVIR User s Manual 47 2 3 4 Integrated Peripherals...