EGS-MX1
66 EGS-MX1 Quick Reference Guide
Flow Control
None
[Default]
Hardware RTS/CTS
Flow control can prevent data loss from buffer
overflow. When sending data, if the receiving
buffers are full, a
‘stop’ signal can be sent to stop
the data flow. Once the buffers are empty, a
‘start’ signal can be sent to re-start the flow.
Hardware flow control uses two wires to send
start/stop signals.
VT-UTF8 Combo Key Support
Disabled,
Enabled
[Default]
Enable VT-UTF8 Combination Key Support for
ANSI/VT100 terminals.
Recorder Mode
Disabled
[Default]
,
Enabled
With this mode enabled only text will be sent.
This is to capture Terminal data.
Resolution 100x31
Disabled
[Default]
,
Enabled
Enables or disables extended terminal resolution.
Putty KeyPad
VT100
[Default]
LINUX
XTERMR6
SCO
ESCN
VT400
Select FunctionKey and KeyPad on Putty.
3.6.2.10.2 Legacy Console Redirection Settings
Item
Option
Description
Redirection COM Port
COM0
[Default]
Select a COM port to display redirection of
Legacy OS and Legacy OPROM Messages.
Resolution
80x24
[Default]
80x25
On Legacy OS, the Number of Rows and
Columns supported redirection.
Redirect After POST
Always Enable
[Default]
BootLoader
When Bootloader is selected, then Legacy
Console Redirection is disabled before booting to
legacy OS. When Always Enable is selected,
then Legacy Console Redirection is enabled for
