AID-240SBW Quick Reference Guide
AID-240SBW Quick Reference Guide
4
7. Make sure the voltage of the power source is correct before connecting the
equipment to the power outlet. Position the power cord so that people cannot step on
it. Do not place anything over the power cord. If the equipment is not used for a long
time, disconnect it from the power source to avoid damage by transient over voltage.
Caution!
Do not leave this equipment in an uncontrolled environment where the
storage temperature is below -20° C (-4° F) or above 60° C (140° F).
this may damage the equipment.
8. If your computer is losing dramatic time or the BIOS configuration reset to
default, the battery has no power.
Caution!
Do not replace battery yourself. Please contact a qualified technician or
your retail. The computer is provided with a battery-powered real-time
clock circuit. There is a danger of explosion if battery is incorrectly
replaced. Replace only with same or equivalent type recommended by
the manufacture.
Discard used batteries according to the manufacturer’s instructions
9. Improper installation of VESA mounting can result in serious personal injury! VESA
mount installation should be operated by professional technician, please contact the
service technician or your retail if you need this service.
10. Environmental protection: follow national requirements to dispose of unit.
11. Maintenance: to properly maintain and clean the surfaces, use only the approved
products or clean with a dry applicator.
12. Make sure the user not to contact SIP/SOPs and the patient at the same time.
13. When networking with electrical devices, the operator is responsible for ensuring
that the resulting system meets the requirements set forth by the following standards:
– EN 60601-1 (IEC 60601-1)
Medical electrical equipment
Part 1: General requirements for safety
–
EN 60601-1-1 (IEC 60601-1-1)
Medical electrical equipment
Part 1-1: General requirements for safety
