2.2 Tips
Unity Level - The Vt-747sp is calibrated so
that unity level is +4dBu.
INPUT - Use the input control as a gain
control, not a level control. This will drive the
tubes and/or transistors harder for different
tone.
OUTPUT - Use the output control as the
overall level control.
TSP (Tube Signal Path) - Pressed in
(illuminated) is tube mode. Pressed out (non-
illuminated) discrete Class A mode.
EQ > COMP - Inserts the six-band graphic
EQ before (pre) the compressor in the signal
path.
SIDE-CHAIN - Engages the built-in side-
chain. Use the SIDE CHAIN THRESHOLD
and the corresponding frequency bands to
compress specific frequencies.
SC LISTEN - To monitor the signal through
the side chain.
GR (Blue LED) - Fast-acting LED illuminates
when peak gain reduction begins to occur.
EQ - Six-band graphic EQ parameters:
Low to high (left to right)
+/-24dB 15Hz shelf
+/-8dB 125Hz selected Q
+/-4dB 500Hz selected Q
+/-4dB 2kHz selected Q
+/-10dB 5kHz shelf
+/-20dB 32kHz shelf
2.3 Tutorial - Using it all
The following is a tutorial that will quickly get
you familiar with all of the functions of the
Vt-747sp.
Start by plugging a stereo source (CD player,
stereo keyboard, Submix output, etc.) into
your Vt-747sp. If possible, run directly out of
the Vt-747sp to powered monitors bypassing
the console or mixing board. Choose a
musical selection, loop, patch, sample or
instrument with wide dynamic range so you
can experiment with the compressor.
Set push button switches to their off or non-
illuminated position.
1. INPUT - Set to 5. (Adjust OUTPUT so that
overall signal level is at a comfortable
monitoring level.
2. GAIN +10dB - Press in and out to get a feel
for the sound of the high gain switch. Leave
it non-illuminated.
3. EQUALIZER - (Located on right side of
panel) press in equalizer switch and
familiarize yourself with the six band
equalizer. Adjust the two outside bands half
way between unity and maximum, and the
four mid-bands to half way between unity and
minimum. Toggle the EQUALIZER switch in
and out.
4. COMPRESSOR - Press in COMPRESSOR
switch and turn the main compression controls
to the following:
COMPRESSION - fully clockwise
THRESHOLD - fully counter clockwise
ATTACK - fully counter clockwise (Fast)
RELEASE - fully clockwise (Slow)
Page 9
Avalon Vt-747sp Operation Manual
AVA L O N D E S I G N
Quick Start-up