background image

32 

Speaker Placement 

Although your A

VALON 

A

COUSTICS

 loudspeakers may be placed in a wide 

variety of positions relative to the walls of the room, it is still wise to experiment 

a bit to achieve optimal results. The suggested minimum distances for the 
COMPÁS are 3 feet from one wall (side or rear), and 5 feet from the other (all 

distances are measured to the center of the woofer cone). This will provide 

the proper degree of bass reinforcement, as well as minimize early reflections. 
 

There is no suggested upper limit for the distances to the walls. Even a 

distance of 10 feet to one wall and 15 feet to the other wall will provide 
suitable bass reinforcement, and problems due to early reflections will be 

non-existent. However, regardless of the absolute numbers used, the most 

even bass response will be attained if the distances from the side wall and the 
rear wall are not overly similar. 

 

Early Reflections 

When arranging the furnishings in your listening room, remember that 
reflective objects should not be within a five foot radius of either the speaker 

or listener to avoid early reflections. This suggests the possibility of a 

dual-purpose room, with one end devoted to music reproduction, and the 
other end for another use, such as a study or office. In this way, the area 

behind the listener will contain items that will reduce problems with standing 

waves and/or flutter echo, while the zone around the speakers remains 
relatively free from reflective objects. 

 

If you wish to achieve an even more spacious sound-stage, it may be useful 
to place a sonically absorbent material on the side and rear walls near the 

speakers. This can be particularly effective at the points where the sound 

wave is directly reflected to the listening position (a mirror can be used to 
determine these points, as illustrated in Fig. 8.2). As the distance to the wall 

becomes smaller, the suppression of these reflections becomes more 

important. 
 

Early reflections will tend to diminish the soundstage in the direction of the 

reflections, i.e. early reflections from the side walls tend to reduce 
sound-stage width, while early reflections from the back wall will reduce 

image depth. We have found that a strong sense of depth enhances the 

feeling of involvement when listening, due to the three-dimensional solidity of 
images. Therefore, it is more important to have a greater distance from the 

speakers to the rear wall than to the sides walls. Typically, this is easier to 

achieve if the speakers are placed along the short wall of the listening room. 

Содержание Compas














































Отзывы: