14
Heat Mode
Only available on certain models
This mode allows the unit to run as a heat pump. The unit must be vented for it to expel the cold air out
of the exhaust.
To operate the unit in heat mode:
1.
Press the
Mode button until the
heat indicator is selected.
2.
Set the thermostat by using the
Up and
Down buttons. The thermostat is adjustable
between 61° F – 77° F in one degree increments.
Fan Only Mode
Fan Only mode is used to circulate the air in your room. No temperature setting is needed. The front
panel lights will be green.
To operate the unit in Fan Only mode:
1.
Make sure the power cord is plugged into a power outlet.
2.
Press the
Power button on the remote control.
3.
Press the
Mode button until the
Fan Only indicator is selected.
4.
Press the
Speed button to select the fan speed. You can choose between
Automatic,
High, Medium, and Low.
Automatic Mode
In Automatic mode, the unit will cool, dehumidify, or heat (certain models) depending on the ambient
temperature. As the temperature in the room changes, the mode and fan speed will change
automatically. The front panel lights will change depending on the mode.
To operate the unit in Automatic mode:
1.
Make sure the power cord is plugged into a power outlet.
2.
Press the
Power button on the remote control.
3.
Press the
Mode button until the
Automatic indicator is selected.
Fan Speed
The
Fan Speed button is used to change the fan speed while in Cooling and Fan Only modes.
Press the
Fan Speed button to select the fan speed. The
Automatic, High, Medium, or Low
indicator can be selected.
NOTE: Fan Only mode does not
require that the exhaust hose be
attached.
Note: Fan Only mode does not require that the exhaust hose be attached.
Note: You will not be able to change the fan speed if the unit is in Automatic or Dehumidify mode.
Содержание APAC140HC
Страница 27: ...22 Avallon Product Warranty ...